Weboldalunk használatával jóváhagyja a cookie-k használatát a Cookie-kkal kapcsolatos irányelv értelmében.

MIG 307Si (18/8/6CrNiMnSi) 1,0mm 15kg/cs. Elga Cromamig rozsdamentes huzal vegyes kötésekhez, Mn acélokhoz

ELGA
4.547 Ft
3.865 Ft (3.043 Ft + ÁFA)
Kedvezmény: 15%
Menny.:kg
Legkisebb rendelhető mennyiség: 15!
Nem értékelt
Cikkszám: 112283
Szállítási díj: 1.638 Ft
Várható szállítás: 2021. november 02.
Elérhetőség: Utolsó 15 kg raktáron
Kedvező árak
Kedvező árak
Gyors kiszállítás
Gyors kiszállítás
Garancia
Garancia
4.547 Ft
3.865 Ft (3.043 Ft + ÁFA)
Kedvezmény: 15%
Menny.:kg
Legkisebb rendelhető mennyiség: 15!

Leírás

Cromamig 307 Si G 18 8 Mn ER 307Si Rp 0,2%: 380 MPa Rm: 600 MPa A5: 40% CV: 20 ° C-on 100 J 0,80 – 1,20 mm


Classification:
EN ISO 14343 G 18 8 Mn
AWS A5.9 ~ER307


Description:
Cromamig 307Si produces a tough, ductile, 19% Cr / 9% Ni / 7% Mn austenitic stainless weld metal
which is highly crack resistant. It is intended for joining hardenable steels, armour plate, 13% Mn
steels and difficult-to-weld steels, without the need for preheat. It is also recommended for dissimilar
joints between stainless and mild or medium carbon steels. Welds produced with Cromamig 307Si
can be PWHT without risk of sigma-phase formation and consequent loss of ductility. The deposit
work hardens from 200 HV to 450 HV.
APPLICATIONS: Buffer layers on 13% Mn steels used in rock crushing and earth moving equipment,
prior to hardfacing. Reclaiming 13% Mn steels. Surfacing of rails, rail crossings, frogs etc. Buffer
layers in highly restrained repair work.

Welding current:
DC+
Shielding gas:
M12, Ar + 1-3% O2, 16-21 l/min
M13, Ar + 2% CO2, 16-21 l/min

Ismertető

Cromamig 307 Si G 18 8 Mn ER 307Si Rp 0,2%: 380 MPa Rm: 600 MPa A5: 40% CV: 20 ° C-on 100 J 0,80 – 1,20 mm


Classification:
EN ISO 14343 G 18 8 Mn
AWS A5.9 ~ER307


Description:
Cromamig 307Si produces a tough, ductile, 19% Cr / 9% Ni / 7% Mn austenitic stainless weld metal
which is highly crack resistant. It is intended for joining hardenable steels, armour plate, 13% Mn
steels and difficult-to-weld steels, without the need for preheat. It is also recommended for dissimilar
joints between stainless and mild or medium carbon steels. Welds produced with Cromamig 307Si
can be PWHT without risk of sigma-phase formation and consequent loss of ductility. The deposit
work hardens from 200 HV to 450 HV.
APPLICATIONS: Buffer layers on 13% Mn steels used in rock crushing and earth moving equipment,
prior to hardfacing. Reclaiming 13% Mn steels. Surfacing of rails, rail crossings, frogs etc. Buffer
layers in highly restrained repair work.

Welding current:
DC+
Shielding gas:
M12, Ar + 1-3% O2, 16-21 l/min
M13, Ar + 2% CO2, 16-21 l/min

Vélemények

Erről a termékről még nem érkezett vélemény.
Írja meg véleményét!

Facebook kommentek