Keresés

Designed for water-cooled torches rated to 500 amps*, the Coolmate 3 is an economically priced 3-gallon cooler with all the ingenious design features you’d expect from Miller.

Running on 115 VAC, the Coolmate 3’s closed-loop design with radiator reduces coolant temperature and protects against overheating. The coolant’s reservoir tank is molded polyethylene, as are the fan shroud and easy fill spout, so corrosion is never a concern.

Equipped with standard inlet/outlet torch fittings, the Coolmate 3 is compatible with all TIG and MIG torches with standard 5/8-18 left-hand fittings. The included 10-foot (3 m) power cords with plugs are longer than most power cords in the industry — for extra length when you need it.

*May vary with torch design and cable length.

OVERVIEW

Midsize, horizontal design for easy stacking and mounting

Front panel controls include: power switch, paddle wheel coolant flow indicator, filter and coolant filling spout

Polyethylene-molded coolant tank, fan shroud and filler spout

Factory-set pressure relief valve (55 PSI) maintains consistent pressure during use

Thermally protected 1/4 HP motor

Efficient fin and tube heat exchanger

Brass-body, positive displacement rotary vane pump for consistent coolant flow and long pump-life

Compatible with Miller coolants

Weight: 40 lb (18 kg) dry

Model: Coolmate 1.3

Motor Input Voltage: 115 V, 60 Hz

Maximum Cooling Capacity* : 3,400 W, (11,600 Btu/hr.), 3.8 qt./min. (3.6 L/min.)

Rated Cooling Capacity**: 1,330 W, (4,540 Btu/hr.), 1.1 qt./min. (1 L/min.)

Dimensions: H: 11.25 in. (286 mm), W: 10.38 in. (264 mm), D: 24 in. (610 mm)

Weight Without Coolant Net: 43 lb. (20 kg)

*Maximum cooling capacity is based on a 25° Celsius (77°F) environment at maximum flow with a 65° Celsius (149° F) coolant temperature rise.

** Rated IEC standard cooling capacity is based on a 25° Celsius (77°F) environment at a flow of one liter per minute with a 40° Celsius (104°F) coolant temperature rise.

Closed-loop design with radiator reduces coolant temperatures and

prevents the system from overheating. Closed-loop design also

recirculates the coolant through a fan-cooled heat exchanger.

Rustproof coolant reservoir molded of poly ethylene for durability and

corrosion resistance.

Standard inlet/outlet torch fittings are compatible with TIG and MIG

torches having standard 5/8-18 left-hand fittings.

10-foot (3 m) power cords with plugs are longer than most power cords

in the industry — providing the extra length when required.

Compatible with Miller® coolants and are ideal for warm and cold

weather conditions, while providing HF or corrosion protection.

i.e.:

https://www.millerwelds.com/-/media/miller-electric/imported-mam-assets/spec-sheets/5/e/a/ay7-2.pdf